Forex Gainscope
Online Broker: Trade Forex, Gold, Silver. Click Here to Open an Account


Forex for September 29, 2011. Signal and Analysis


EUR/USD
It is more likely to go up to around 1.36 or higher, and after that, it might have potentially to go down to around 1.35 or lower.
(Current Price: 1.3536)

GBP/USD
It is more likely to go up to around 1.5640 or higher, and after that, it might have potentially to go down to around 1.5520 or lower.
(Current Price: 1.5564)

AUD/USD
It is more likely to go up to around 0.9780 or higher than 0.98, and after that, it might have potentially to go down to around 0.9650 or lower.
(Current Price: 0.9728)

USD/JPY
No Comment

USD/CHF
No Comment

Below is Our Forex Trading Signals and Tips: (don’t be too late, see our posting time)
EUR/USD Buy now at 1.3536
GBP/USD Buy now at 1.5564
AUD/USD Buy now at 0.9728
(TP is starting from 20 to 100 pips or using a trailing stops 15, SL should not more than 5% risk)

Important Forex News Schedule for Today: (Time zone: GMT+7 / WIB)
13:00 GBP
13:15 JPY
14:00 GBP
14:55 EUR
15:30 GBP
19:30 USD
21:00 USD

(beware of the News Revision and Breaking News – Watch our Realtime Forex News Calendar)
www.gainscope.com/calendar.php

Daftarkan di Newsletter FOREX ALERTS kami dengan Gratis di:
www.gainscope.com/forex/newsletter/ agar dapat menerima update alarm prediksi ini melalui email anda.

 

GainScope.com

 


Did you enjoy this post? Why not leave a comment below and continue the conversation, or subscribe to my feed and get articles like this delivered automatically each day to your feed reader.



GainScopefx.com - Forex





Trackbacks & Pingbacks

No trackbacks/pingbacks yet.

Comments

Om GS, bbrp hari ini prediksinya agak siang ya. Prediksimu selalu kutunggu-2 nich. Maklum ane blm expert betul dlm melakukan prediksi dan mapping FOREX. Tetap semangat ya Oom GS, Ane selalu tunggu prediksimu ….CU

@forexsbyku, mungkin pertimbangannya disesuaikan dengan kondisi pasar dan analisa teknikal, jd prediksi ga harus selalu subuh keluarnya om, yg penting tetap profit 🙂

@forexsbyku,
iya Pak karena kita menyesuaikan kondisi market juga

Terima kasih Pak atas apresiasinya

bung beben, nany nih,
misal pake robot tp dan sl nya diperpendek gimana?
jadi separo gitu? efeknya apa?? makasih.

@warhan,default aja bro karena tp sl nya pake dinamis TS dimulai dari 25pips…begitu ada hentakan langsung close….ini yg saya suka sistem TS nya….salam profit ,heuheuheu

@warhan, permisi ya Pak.Sekalian juga saya nanya ttg kang Obotnya Kang Beben.
kang Beben, sekalian juga saya ada pertanyaan sbb :
1. Apakah Setting EA dibawah ini sdh betul ?
TakeProfit = 50
StopLoss = 0
DisableTrailingStop = true

2. Bisa dijelaskan yg dimaksud dengan Straddle ?
Thx berat Kang Beben….

@forexsbyku, Start With Straddle

Straddle
Value : true or false (default)

Straddle technique is a technique to open Buy Stop order above the current price and Sell Stop order below the current price at the same time. This technique is often used before Important News Announcement.

Additional settings you need to set is Straddle Range OR (StraddleBuyPrice and StraddleSellPrice). If you have set Straddle Range, you do not need to fill StraddleBuyPrice and StraddleSellPrice. To activate this feature please set true.

Tip: You can combine Straddle with Hedging strategy 1 or 2 minutes prior to important news is announced. Please set Straddle and Hedging value to true to combine these techniques.

StraddleRange
Value : 8 (default), 15, 20, etc. (in point)

StraddleRange is the gap between pending orders and current price. When you fill in 10. Expert Advisor will order Pending Buy Stop at current price plus 10 points and Sell Stop orders at current price minus 10 points. To allow StraddleRange to work properly, Straddle feature must be set true

StraddleBuyPrice
Value : 0 (default), 2.0000, 1.9530, etc. (in price)

StraddleBuyPrice is the price of Buy Stop order you want to fill in manually. StraddleBuyPrice can be filled independently if you want to use different range interval with Sell Stop range.

For example: Buy Stop Order is 15 points away from current price, while the Sell Stop Order is 10 points away from current price. After you set StraddleBuyPrice please set the input StraddleSellPrice. To allow StraddleBuyPrice to work properly, Straddle features must be set true

StraddleSellPrice
Value : 0 (default), 2.0000, 1.9530, etc. (in price)

StraddleSellPrice is the price of Sell Stop order you want to fill in manually. StraddleSellPrice can be filled independently if you want to use different range interval with Buy Stop range. To allow StraddleBuyPrice to work properly, Straddle features must be set true

StraddleTakeProfit
Value : 20 (default), 15, 30, etc. (in point)

StraddleTakeProfit is Take Profit level of Buy Stop and Sell Stop order you want to use. If Hedging is in true state, then when one of the pending orders is touched and executed, the other pending order will be cancelled.

The next step is hedging system will take over and set the appropriate Take Profit level automatically according to Hedging Take Profit level setting. To allow StraddleTakeProfit to work properly, Straddle features must be set true

StraddleStopLoss
Value : 0 (default), 15, 20, 30, etc. (in point)

StraddleStopLoss is Stop Loss level of Buy Stop and Sell Stop order you want to use. If Hedging is in true state, then when one of the pending orders is touched and executed, the other pending order will be cancelled.

The next step is hedging system will take over and set the appropriate Stop Loss level automatically according to Hedging Stop Loss level setting. We recommend that you set StraddleStopLoss to 0 while using it with Hedging strategy. To allow StraddleStopLoss to work properly, Straddle features must be set true

@forexsbyku, Hedging Strategy

Hedging
Value : true (default) or false

Hedging is a strategy to exploit breakout trading system with hedging technique. To turn off Hedging strategy, please set Hedging value to false.

HedgeGap
Value : 23 (default), 25, 30, etc (in point)

HedgeGap is a distance (gap) between initial buy and sell positions. To allow Hedging strategy to work properly, HedgeGap feature must be true

Multiplier
Value : 0 (default), 1.5, 2, etc (Allowed max is 2 digits decimal)

Multiplier is multiplier ratio of the following open position’s lot. The default setting of 0 is safe. However you may input different setting as you wish. By setting the multiplier to 2, the following position’s lot is doubled (2x) previous positions lot. Example: 1,2,4,8, etc.

By setting the multiplier to 3, the multiplier lot is 1,3,9, etc. (very dangerous).

By setting the multiplier to 1, the multiplier lot sequence is : 1,2,3,4, etc. For safety use only default 0 to 2. (It is not recommended to change this feature unless you have mastered Super Hedging).

TakeProfit
Value : 150 (default), 200, etc (in point)

TakeProfit is a second priority take profit level, TakeProfit should be input above 150 to avoid loss. Increasing range can cause losses if TakeProfit is set too low. The primary TakeProfit level is replaced by Trailing Stop function in Super Hedging. TakeProfit serves as secondary / backup TP level.

Therefore, do not disable Trailing Stop for safety.

Stop Loss
Value : 0 (default), 100, etc (in point)

Stop Loss is recommended to be left at default 0. When you set 0, EA will automatically set Stop Loss by its calculation. Setting Stop Loss to 0 is important. Filling Stop Loss with wrong value can be very harmful. If you dont know much, please leave this setting as default

GapAdjustment
Value : true or false (default)

GapAdjustment is a feature to automatically adjusting the distance gap while slippage occurs. This feature is useful if gaps occur at the time of ordering new positions. To enable GapAdjustment, please set to true (It is not recommended to change this feature unless you have mastered Super Hedging)

Averaging Strategy (averaging is only for eligible Live Account in B Class Platform)

Averaging
Value : true or false (default)

Averaging is a strategy to optimize averaging technique which has been mentioned in “Trading Strategy” page, the Quantum. To enable Averaging please set to true

AveragingHedgeGap
Value : 20 (default), 25, 30, etc (in point)

AveragingHedgeGap is a gap between initial buy position to the next buy, or between initial sell position to the next sell. To enable AveragingHedgeGap, Averaging feature must be set true

AveragingMultiplier
Value : 2 (default), 1, 1.5, 1.75, etc (decimal is allowed)

AveragingMultiplier is lot size incremental ratio for the next position. Default setting of 2 is considered to be safe enough to use. By setting multiplier to 2, the lot size for next position is doubled. Example: 1,2,4,8, and so on. If you set multiplier to 3, the sequence is 1,3,9, and so on. (very dangerous). By setting 1, lot size multiplier is: 1,2,3,4, and so on. If you set multiplier to 0. the next lot size will be the same as initial LotSize setting. Example: 1, 1, 1, and so on. For safety please use multiplier 0 to 2 only. (Unless you are very skillful in trading)

AveragingTakeProfit
Value : 50 (default), 20, 25, etc (in point)

AveragingTakeProfit is secondary Take Profit level. You can set any value you want. The AveragingTakeProfit is only a backup Take Profit level

Primary Take Profit level is taken over by trailing Stop feature. Therefore do not turn off the trailing Stop for safety

AveragingStopLoss
Value : 0 (default), 100, etc (in point)

AveragingStopLoss should be set to default 0 or any value you wish. Setting Stop Loss value is very crucial. We recommend you to leave Stop Loss empty (Not advisable to change this feature unless you are very skillful in trading)

MaxLotStop
Value : 0 (default), 0.8, 1, etc (in decimal lot)

MaxLotStop is the maximum lot that can be ordered. Suppose you want the maximum lot amount to open is limited to 1 lot. Please fill in 1. EA will not open new positions in case the lot amount is more 1 lot. To turn off this feature please set to 0. (Not advisable to change this feature unless the set has been advanced)

StartFromHiLow
Value : false (default) or true

StartFromHiLow is a feature that allows EA to open Buy and Sell positions whenever market price is approaching daily high low extreme points to minimize the risk of Averaging technique. StartFromHiLow is created based on thought that after market makes a large daily high low range, market price is likely to reverse after reaching daily high or low points.

For example : Current Hi Low range is 200 points for GBP/USD pair, after hiking to high of the day, market price is likely to go down than moving upward. This also happens to low of the day. Hence EA will open limit sell around daily high and limit buy around daily low.

MinimumHiLowRange
Value : 100 (default), 130, etc (in point)

MinimumHiLowRange is a minimum daily high low range to trigger EA to open pending limit buy and sell positions. For example, current daily high low range is less than 100 points, MinimumHiLowRange value is previously set to 100 then EA will not open any positions until current high low range reaches at least 100 points. To enable MinimumHiLowRange, StartFromHiLow must be set true

RangeFromHiLow
Value : 5 (default), 10, etc (in point)

RangeFromHiLow is gap among pending limit Sell to current daily High price and gap among pending limit buy to current daily Low price. Value of 5 means that EA will order Limit Sell 5 points away above and at the same time order Buy Limit away below current Low price. This setting is useful to prevent Limit pending orders from being touched whenever daily high or low price are touched (as daily high or low breakout is usually confirmed by testing points above high or below low). In this case sell limit order will be set at high + RangeFromHiLow and buy limit order will be set at low – RangeFromHiLow

Initial Order

InitialOrder
Value : auto (or “a”) (default), manual (or “m”), buy auto (or “ba”), or sell auto (or “sa”). Fill only with all small letters, for buy auto and sell auto, you must use a space between them. . For manual, auto buy, and auto sell you can use abbreviations. For example, just “a”, “m”, “ba”, or “sa” without the quotation marks ( “).

InitialOrder is initial open order setting at the first time Expert Advisor is ON.

auto : EA will open buy or sell order automatically based on 2 EMA (Exponential Moving Average) crossover. There are 2 EMAs used, Short and Long EMA (EMA setting can be changed in the Short and Long option)

manual (or “m”) : You have to open initial order manually at market price. (Market Order). Once open order exists, Expert Advisor will take over and continue automatically. If you set EALoop value more than 1 or EALoop = 0 (Looping Non Stop), after the first loop is closed, EA will open automatic order based on EMA crossovers in the next loop (continue with auto setting).

buy auto (atau “ba”) : Initially EA will open buy order at market price. If you set EALoop value more than 1 or EALoop = 0 (Looping Non Stop), after the first loop is closed, EA will open automatic order based on EMA crossovers in the next loop (continue with auto setting).

sell auto (atau “sa”) : Initially EA will open sell order at market price. If you set EALoop value more than 1 or EALoop = 0 (Looping Non Stop), after the first loop is closed, EA will open automatic order based on EMA crossovers in the next loop (continue with auto setting).

ShortEMA
Value : 5 (default), 10, etc. (according to timeframe you set)

ShortEMA is a signal decision maker for auto setting in initial order option. When you use the EA on the 1 minute chart timeframe means that ShortEMA 5 is based on average value of 5 bars EMA calculation in 1 minute chart. ShortEMA MUST be smaller than LongEMA, otherwise the signal will be reversed. (false)

LongEMA
Value : 14 (default), 20, 50, 100, etc. (according to timeframe you set)

LongEMA is a signal decision maker for auto setting in initial order option. LongEMA has the same calculation formula with ShortEMA. The difference is LongEMA has to have longer value than ShortEMA. Therefore you MUST input greater value than ShortEMA, otherwise the signal will be reversed. (false)

@beben, Terima kasih Kang. Sekarang saya ngerti kenapa kang beben butuh pakai VPS, krn mengambil keuntungan di hentakan diatas ya. jadi semuanya default kecuali intial order saja yg diubah. Sekali lagi kang, terima kasih banyak.

kang eben, theorinya banyak amiiirrr…
kang, mohon doa restunya ane lg nerapin jurus pispot kang eben, OP +/- 10. gak pake mang obot, ane pake manual (menurut ane, manual sensasinya lebih hhmmmmm) + panduan fibo retracement buat ambil TP dan SL. itung-itung jadi satpam pispot deh… lumayan juga hasilnya. mudah2an konsisten.

@suro,
Sekedar saran …
Sebaiknya main di EUR saja …

@Zule, thanks brother.

@suro, Sama bro. Saya sdh cukup lama menerapkan spt yg Bro katakan. Hasil bisa maksimum, tapi bisa juga loss byk krn kita keder juga thd strategy yg sdh kita tetapkan. Sehingga nggak konsisten dan loss. Walaupun loss bisa dieliminasi, hasil selama ini bagus kok. Cuma kita mesti di depan laptop, khan lebih baik spt Kang beben pakai robot. Tentukan titik entry, setelah itu diserahkan ke robot. Secara berkala di cek, hasil juga profit. Kelebihan menggunakan Kang Obot, kita bisa gunakan tenaga kita utk yg lain. Dan kita tidak jenuh memandang Laptop. Rencan ke depan sich, aku pakai kombinasinya. krn hasil testku dari kang Obot tsb, memang layak diguanakan sebagai tools yg baik dan berguna. kata kuncinya memang berada di posisi open kita kok. Selanjutnya kang Obot yg bekerja menyelesaikan misi kita. Terus semangat Bro……

@forexsbyku, Betul bro kuncinya adalah titik OP,filosofi saya Pispot adalah garis/batas yg sulit ditembus …jika tembus 20pips biasanya langsung bablas…dari itu robot dipasang menjaga diatas dan dibawah pispot….,jadi gaya trading saya bukan analisa harga kemana yg penting kenceng mau buy/sell podowae…apalagi dg market yg sedang kacau balau begini lonjakannya kenceng..ini yg disukai kang obot,heuheuheu

@forexsbyku, matur nuwun brother. kalo ada progress tolong di share ya…

How to set EA parameters quickly by using presets

If you frequently use a particular personal EA setting, please use presets. Preset is a file that contains trader’s favorite EA setting.

As an example, a trader wants to use a setting which is different from the default setting. As usual, the trader simply needs to execute the EA by double clicking Super Hedging EA, and after EA window appears, click on Input tab. Change the settings you want, when you’re done, click “Save” to save the settings in a preset file. To load a personal setting, you can click on “load”, select the file you saved, and click OK to execute the EA according to the personal setting.

Making a descriptive preset name is important, if you use multiplier 2 and timelimit true, then you may use Multi2TLimit.set for an example to easily identify the setting in the future.

EA Setting for beginners

If you are a beginner who is still confused, please use the default settings or use 3 main settings as follows
Mode = example h2, hn, hn2, ht, ht2, etc.
LotSize = please adjust LotSize based on your capital and minimum lot allowed by your broker
MaxRiskPercentage = maximum tolerable risk (in percent)
Detailed explanation regarding three settings above can be read below :

“Super Hedging” Feature and Setting Guide
Mode
Value :
normal (default)
Hedging : h, h2, hn, hn2, ht, ht2
Averaging : a, at, an, ahl, myav, myav2 (averaging is only for eligible Live Account in B Class Platform)

Mode is a setting to allow traders use the most common EA settings quickly and practically. Mode is similar to a preset, but mode has built in settings embedded in the EA.

Mode field must be filled with lower-case letters, without quotation marks, and no spaces. One mode can not be mixed with other modes. For example you want to use hedging multiplier 2, then simply fill in h2 in mode field and click OK. You can not combine 2 mode at the same time, for example: “h2 hn”

By entering, for example : h2 mode. The EA will then automatically input these settings

Mode h2 Parameter :
Averaging=false
TimeLimit=false
Hedging=true
Multiplier=0
GapAdjustment=false

Filling h2 in “mode” field is the same as setting the five setting above manually one by one and leave the other settings remain default.

Important tip to keep in mind is settings other than five settings above is kept in standard value and not changed. If you want to use a mode and intend to change other value for an addition. Please input the mode, change other setting’s value, and then click OK.

You can also save “mode” and additional settings in presets as usual.

Detailed explanation of EA Super Hedging Mode settings :

Mode h : (Risk : 1)
Averaging=false
TimeLimit=false
Hedging=true
Multiplier=0
GapAdjustment=false

This Mode uses Hedging technique, Multiplier 0 (increment of 1,2,3,6 and so on). Looping for 1 round. EA will be stopped after all positions are closed.

Mode h2 : (Risk : 3)
Averaging=false
TimeLimit=false
Hedging=true
Multiplier=2
GapAdjustment=false

This Mode uses Hedging technique, Multiplier 2 (increment of 1,2,4,8 and so on). Looping for 1 round. EA will be stopped after all positions are closed.

Mode hn : (Risk : 3)
Averaging=false
EALoop=0
TimeLimit=false
Hedging=true
Multiplier=0
GapAdjustment=false

This Mode uses Hedging technique, Multiplier 0 (increment of 1,2,3,6 and so on). Looping for non stop. Each time all positions are closed, EA will open a new position (continue to the next loop).

Mode hn2 : (Risk : 4)
Averaging=false
EALoop=0
TimeLimit=false
Hedging=true
Multiplier=2
GapAdjustment=false

This Mode uses Hedging technique, Multiplier 2 (increment of 1,2,4,8 and so on). Looping for non stop. Each time all positions are closed, EA will open a new position (continue to the next loop).

Mode ht : (Risk : 2)
Averaging=false
TimeLimit=true
Hedging=true
Multiplier=0
GapAdjustment=false

This Mode uses Hedging technique, Multiplier 0 (increment of 1,2,3,6 and so on). Looping non stop for a few hours daily based on TimeLimit time range set by the EA. (Timelimit detailed explanation can be found within TimeLimit section in this page)

Mode ht2 : (Risk : 3)
Averaging=false
TimeLimit=true
Hedging=true
Multiplier=2
GapAdjustment=false

This Mode uses Hedging technique, Multiplier 2 (increment of 1,2,4,8 and so on). Looping non stop for a few hours daily based on TimeLimit time range set by the EA. (Timelimit detailed explanation can be found within TimeLimit section in this page)

Mode a : (Risk : 3)
Averaging=true
Hedging=false
TimeLimit=false
AveragingMultiplier=2

This Mode uses Averaging technique, AveragingMultiplier 2 (increment of 1,2,4,8 and so on). Looping for 1 round. EA will be stopped after all positions are closed.

Mode at : (Risk : 2)
Averaging=true
Hedging=false
TimeLimit=true
AveragingMultiplier=2

This Mode uses Averaging technique, AveragingMultiplier 2 (increment of 1,2,4,8 and so on). Looping non stop for a few hours daily based on TimeLimit time range set by the EA. (Timelimit detailed explanation can be found within TimeLimit section in this page)

Mode an : (Risk : 4)
Averaging=true
Hedging=false
EALoop=0
TimeLimit=false
AveragingMultiplier=2

This Mode uses Averaging technique, AveragingMultiplier 2 (increment of 1,2,4,8 and so on). Looping for non stop. Each time all positions are closed, EA will open a new position (continue to the next loop).

Mode ahl : (Risk : 1)
Averaging=true
Hedging=false
TimeLimit=false
StartFromHiLow=true
AveragingMultiplier=2

This Mode uses Averaging technique, AveragingMultiplier 2 (increment of 1,2,4,8 and so on). Looping for non stop as long as Hi Low Range is more than the Range set at MinimumHiLowRange.

Mode myav : (Risk : 2.5) (new)
AveragingHedgeGap=50
AveragingMultiplier=2
AveragingTakeProfit=35
AveragingStopLoss =0
increase=0
Hedging=false
Averaging=true
TrailingStop=50
TrailingStopStartLevel=1
TrailingStopEndLevel=2
Rebound=3
TrailingStop_2=40
TrailingStop_2_StartLevel=2
TrailingStop_2_EndLevel=4
Rebound_2=2
TrailingStop_3=30
TrailingStop_3_StartLevel=4
TrailingStop_3_EndLevel=0
Rebound_3=2
TrailingStop_4=6
TrailingStop_4_StartLevel=5
TrailingStop_4_EndLevel=0
Rebound_4=1

This Mode uses Averaging technique, AveragingMultiplier 2 (increment of 1,2,4,8 and so on). Increase 0. Gap 30 points. Looping for 1 round. EA will be stopped after all positions are closed.

Mode myav2 : (Risk : 2.5) (new)
AveragingHedgeGap=50
AveragingMultiplier=2
AveragingTakeProfit=35
AveragingStopLoss =0
increase=0
StartFromHiLow=true
MinimumHiLowRange=100
RangeFromHiLow=5
HiLowIndicatorLevel=0
Hedging=false
Averaging=true
TrailingStop=50
TrailingStopStartLevel=1
TrailingStopEndLevel=2
Rebound=3
TrailingStop_2=40
TrailingStop_2_StartLevel=2
TrailingStop_2_EndLevel=4
Rebound_2=2
TrailingStop_3=30
TrailingStop_3_StartLevel=4
TrailingStop_3_EndLevel=0
Rebound_3=2
TrailingStop_4=6
TrailingStop_4_StartLevel=5
TrailingStop_4_EndLevel=0
Rebound_4=1

This Mode uses Averaging technique, AveragingMultiplier 2 (increment of 1,2,4,8 and so on). Increase 0. Gap 30 points. Looping for non stop as long as Hi Low Range is more than the Range set at MinimumHiLowRange.

Close All Position

CloseAllPair
Value : true or false (default)

CloseAllPair is a feature to manually close all positions and all pair at the same time. Please set true to close all open positions and pending orders of the same pair. Make sure you get enough profit while using this feature for scalping purposes as if market price is moving fast while you are in the process of closing all positions, you may get losses. (EA needs more time to close more than one open positions)

CloseAll
Value : true or false (default)

CloseAll is a feature to manually close all positions of the same pair at the same time. Please set true to close all current pair’s open positions and pending orders. Make sure you get enough profit while using this feature for scalping purposes as if market price is moving fast while you are in the process of closing all positions, you may get losses. (EA needs more time to close more than one open positions)

Basic Parameter

EALoop
Value : 1 (default), 2, 3, .. etc. or 0 (zero = non stop)

EALoop is a setting for how many loops (rounds) EA will be running. If you set 2 means that EA will be running 2 times a before EA stops. Namely after the first round is closed, EA will remain ON and open position from the beginning again (second loop). After the second loop closing, EA will be OFF

To allow the EA to run continuously without stopping (non stop), you can set EALoop to zero (0). Each time EA is closed, EA will remain ON and open new positions from the beginning again. EA will continue to open new positions after every closing happens. Looping will remain ON like this until you turn off the EA with “CloseAll” or remove the EA manually.

It is advised not to set EALoop 0 as this setting could be dangerous if your capital is not enough / limited. Please use TimeLimit ON instead of EALoop 0. For beginners, use only EALoop 1 for safer trading.

LotSize
Value : 0.1 (default), 0.2, 0.01, 1.00, 0.25, etc. (LotSize Decimal depends on capital and forex platform used)

LotSize setting is open position initial lot. You can use fractional amount, the decimal digits depends on CAPITAL and PLATFORM used. For mini forex platform, you can use 0.1 incremental. Example: 0.2, 0.9, 1.0, 1.5, 5.0 etc. While micro forex platform, you can use 0.01 incremental, for example: 0.02, 0.25, 1.25, 10.00 and so forth.

TimeLimit
Value : false (default)

TimeLimit is a setting to limit open new trades in a time range (12 to 21 wib / 5-14 GMT EST) instead of running for 24 hours. During the time period, EA will always run and looping continuously. When it is closed, EA will always open a new position while current time is still within the range.

TimeLimit setting is almost the same as setting the EA 24 hours (EALoop = 0) nonstop. The different factor is EA will only run in the range. For beginner EALoop settings can be left default (no need to change) To enable TimeLimit, please set true

CloseOneCloseAll
Value : true (default) or false

CloseOneCloseAll is a setting to automatically close all open position while one open position is closed. If CloseOneCloseAll is set to false, while one of open position is closed, the other positions will remain open. Unless there is no open position, all pending order will be closed even CloseOneCloseAll is set false. Usually setting false CloseOneCloseAll is to interfere the EA manually (Setting CloseOneCloseAll is to false is not recommended unless you are skillful enough in using Super Hedging EA)

AutoCalculateLot
Value : true or false (default)

AutoCalculateLot setting is to calculate initial lot amount automatically according to current capital. When you set true, initial lot size setting will not use “LotSize” parameter but will be automatically adjusted based on your current capital balance. AutoCalculateLot setting should be used with LotEquityRatio feature. To enable this feature please set true.

OnlyAllowDecreaseLot
Value : true (default) or false

OnlyAllowDecreaseLot will only work if EALoop is set greater than 1 or 0 (non stop). OnlyAllowDecreaseLot will allow EA to use smaller initial lot than previous loop when there is loss / capital decreasing. If the EA get profit, next loop lot size will remain the same as the previous lot. (No Increase, Decrease Only).

If this feature is turned off, the lot size of the next loop will be automatically calculated based on amount of capital available. While the EA get profit and capital is increasing, the next lot size will be increased, while there are losses and capital is reduced, the next loop’s lot size will be decreased. To turn off this feature please set false.

LotEquityRatio
Value : 1,2,3,..etc

LotEquityRatio setting is to calculate the number of initial lot size automatically based on lotsize to capital ratio. (lotsize amount is counted by number of times of the capital). LotEquityRatio WILL ONLY work when AutoCalculateLot has been set true.

To use lotsize amount of 2x capital. Please fill in 2 on LotEquityRatio. Example: Your capital is $1250, trading on micro lot platform, LotEquityRatio 2. In this case, initial lot used is 1250 x 2 = 2500 or 0.025 (rounded to 0.03). For $1100 capital, trading on micro lot platform, LotEquityRatio 2. In this case, initial lot used is 1100 x 2 = 2200 or 0.022 (rounded to 0.02).

CloseWhileHedgingProfit
Value : 0, 5, 10 (default), etc (in point)

CloseWhileHedgingProfit is a setting for automatically close full hedging order caused by improper manual intervention by trader. Full hedging positions will prevent his EA to work properly. Example: CloseWhileHedgingProfit 10, when the profit is reaching 10 points or more it will close the current profitable position.

Safer

Start_Safer
Value : false (default) or true

Start_Safer setting is to close all positions in small profit / cut BEP (break-even) / or Cut Loss during high level positions for protection.

Important ! This feature will not work if current price has never touched its BEP point. (unless you have set Safer_Money_CutLoss). Safer_Money_CutLoss will still work as a protector eventhough current price has never touched its BEP point.

For example, if you set safer start at level 6, when the level has reached level 6, but the price has never touched the point of total profit 0 (BEP or break-even) then this feature will not be activated and your positions will not be safe unless you have entered Safer_Money_CutLoss value.

Activating Safer feature, Super Hedging will always wait for opportunity until BEP point is touched. If there is no chance in the current level, EA will be looking for opportunities on the next level. Therefore it is suggested that “Safer_EndLevel” is always set to 0 (unlimited)

This feature is created to secure the critical positions (cut loss / BEP / small profit) at high-level (eg level 5, 6 and higher). To enable this feature, please set Start_Safer True

Safer
Value : 3 (default), 0, -3, etc (in point)

Safer is cut BEP / cut loss / cut profit amount in point.

Safer_Money_CutLoss
Value : 100 (default), 300, 500, etc (in dollar, do not enter minus value)

Safer_Money_CutLoss is a feature to cut loss all position in a specific level and amount. The default value of 100 is best fit for mini lots (around $1 per pip). In case you use micro lots, you may adjust the value to a smaller amount, for example $10.

This setting will be optimal when it is set at high level to protect positions from margin call. For example if the Safer_StartLevel is 5 and Safer_Money_CutLoss is $100 then at level 5 when total loss in deposit amount is less or equal than $100, all positions will be cut loss. If the current total loss is still greater than the value you set (eg, current total loss is now $300) it will not be cut loss until it goes to $ 100 or less.

At the next levels, Safer_Money_CutLoss value will be increased automatically by Safer_Multiplier according to the value you set. For Safer_Money_CutLoss=100 and Safer_Multiplier=3, at level 6 Safer_Money_CutLoss will be automatically set at 1x100x3=300, level 7 is 600, and so on. (detailed calculation formula will be explained on Safer_Multiplier section below)

Safer_Money_CutLoss value is increased by Safer_Multiplier to anticipate level increasing as lot size will often doubled at the next levels. We suggest you are willing to cut loss at earlier level (lets say starts at level 5) before things go worse and losses become larger.

Safer_Multiplier (this setting is exclusive for eligible Live Account in B Class Platform)
Value : 3 (default), 0, 1, and above 1, example : 1.5, 2.5, etc

Safer_Multiplier is a setting to enlarge (multiply) Safer_Money_CutLoss value automatically each time there is level increasing. There are 3 options you can choose : 0, 1, or more than 1. Especially for more than 1, you can use 2 digits decimal for example : 1.25, 1.50, 2.50, and so on.

Safer_Multiplier Setting will only work if Start_Safer true and Safer_Money_CutLoss is set more than 0. This setting will be optimal when used at higher levels to protect from Margin Call due to insufficient / limited fund. It is advisable to try Safer_Multiplier, Safer_StartLevel, and Safer_Money_CutLoss value at demo account to find out the optimal setting that will suit your trading style

Example :

Basic Setting :
Safer_StartLevel=5
Safer_Money_CutLoss=100

Safer_Multiplier=0 :
Safer_Money_CutLoss value will be kept fixed each level without any incremental. For example if you use Safer_Money_CutLoss=100 then it will remain $100 at each level starting from Safer_StartLevel you set.

Safer_Multiplier=1 :
By using this setting, at level 5, Safer_Money_CutLoss is set at default value of $100. At the next level (level 6) Safer_Money_CutLoss is set $200, at level 7 Safer_Money_CutLoss is set $300 and so on. The first digit will determine the next sum. For example 100 for 3 digits Safer_Money_CutLoss or 10 for 2 digits Safer_Money_CutLoss.

Another example is : Safer_Money_CutLoss=125, then the sequence starting from level 5 is $125, $225, $325, and so on.

Safer_Multiplier=2 :
By using this setting, at level 5, Safer_Money_CutLoss is set at default value of $100. At the next levels Safer_Money_CutLoss value can be calculated as :

(Current Level – Safer_StartLevel) x Safer_Multiplier x Safer_Money_CutLoss.

The sequence starting from level 5 is $100, $200, $400, and so on.

Calculation details : level 6 : (6-5)*2*100 = $200, level 7 : (7-5)*2*100 = $400, etc.

Safer_Multiplier=3 :
By using this setting, at level 5, Safer_Money_CutLoss is set at default value of $100. At the next levels Safer_Money_CutLoss value are set at 300, 600, 900, etc.

Safer_StartLevel
Value : 5 (default), 7, 8, etc

Safer_StartLevel is a setting to activate Safer feature at a specific level

This setting will be optimal when it is set at high level to protect from the margin call. Calculate carefully by trying in demo account to find out at what level you have to enable Safer feature.

Safer_EndLevel
Value : 0 (default), 7, 8, etc

Safer_EndLevel is a setting to deactivate Safer feature at a specific level

We recommend this setting is always set to 0 (unlimited), to protect from the Margin Call at critical levels.

Incremental Range

Increase
Value : 15 (default), 20, 25, etc (in point)

Increase is the setting to widen the distance of each position on the next level. This feature is very important and must be used to reduce the risk if you trade with hedging strategy
It will always have 2 opposite sides, namely: If the increase value is too wide, it will be more secure in most cases but takes longer time to get profit. If the increase is too small, it will have more risk but it needs less time to get profit. To turn off this feature, please input 0. (It is not recommended to change this feature unless you have mastered Super Hedging trading strategy).

IncreaseStartLevel
Value : 2 (default), 3, etc

IncreaseStartLevel is a setting to activate Increase feature on a specific level.

By setting IncreaseStartLevel 2, the distance / range between the positions will be increased at level 2.

To work properly, IncreaseStartLevel must be set greater than 0.

IncreaseEndLevel
Value : 0 (default), 3, etc

IncreaseEndLevel is a setting to deactivate Increase feature on a specific level.

By setting IncreaseEndLevel 0, means that the distance / range between the position will always be increased. (unlimited) IncreaseEndLevel value must be greater than IncreaseStartLevel. To work properly, IncreaseEndLevel feature must be set greater than IncreaseStartLevel or 0 (always increased on the next level).

Ini adalah Tools Trading yg canggih,kita bisa berkreasi dengan “gaya trading”yg kita punya…untuk pemula pake default aja dulu…saya juga klo hanya sekedar maen di Pispot pake default,coba di Demo dulu deh…semoga membantu,salam profit…heuheuheu

@beben, Sekali-kali coba deh gunakan Smoothed Heiken Ashi System Strategy untuk memperoleh outcome yang lebih agresif pada kondisi market yang sedang CounterTrend ataupun sebagai perisai untuk Hedging entry point.

Untuk para Pivot trader, hari ini GU : Project Up 1.5665 Down 1.5507; EU : Project Up 1.3670 Down 1.3464; AU Project Up 0.9906 Down 0.9598. Secara umum pada pasar yang bergairah khususnya US Market open bisa terjadi ” over shoot ” (anggap aja ini bonusnya), sedangkan pada kondisi normal hampir pasti tercapai 70%-80 %, ini sangat sesuai bagi Pivot Trader yang memiliki habit konservatif.

Anda paling gemar memancing di forum, bagaimana kalau suatu saat kita gathering mancing bareng ke Alasca, menarik lho dan dijamin Anda bakal ketagihan untuk datang berkunjung kembali.

Have a Good Trade Bro

@luky,iya bro ini saya coba smoothed heiken ashi kuskus indy di TF m15…trims,heuheuheu

@beben, Setuju dan benar Kang. Style Trading saya lebih cocok dengan kang Obot ini.

@beben, tidak ada gading yg tak retak. Demikianpun tools ini (kang Obot), ada kelemahan yg sampai saat ini belum /kurang bisa saya selesaikan. Jika kebetulan OP didaerah harga sideways (Bolinger bandnya cenderung flat) dan kebetulan rangenya lebih kecil dari range harga saat sideways. Yang terjadi adalah Kang Obot akan membuka order setiap bolak balik di range harga sideways tersebut. Ujung-2nya lot yg terbuka akan menjadi besar dan menggerus equity kita. Bagaimana Kang Beben untuk mengatasi masalah ini ? Thx Kang.

@forexsbyku, Maaf. Saya salah setting. Mohon statement saya ini dianggap tdk ada ya. Krn hasil evaluasi saya, Kang Obot akan membuka hedging order dengan range semakin lebar sehingga potensi sideways menjadi sangat kecil kemungkinannya (walaupun mungkin bisa sja terjadi kasus ruar biasa). Oleh sebab itu, begitu BEP, saya lakukan close. Apakah sdh benar langkah saya ini Kang beben ? Thx.

@forexsbyku,Nanya kok dijawab sendiri heuheuheu (canda)….iya bro maka dari itu saya OP nya di pispot,Insya Allah gakan ada yg zizag di pispot lebih dari 3x

@beben, om beben mau tanya
apa semua jenis robot bisa di setting untuk teori pispot ?
mohon penjelasan nya om !
trims

@golden boy,beda dunkz bro sistematisnya….,klo mau mudah pake aja Robot GS”Demo” modal minimal 250usd ,risk 100% ,first lot 0.01lot,pending order hanya +/-10pips di Pispot GU…..liat sebulan gimana hasilnya…. heuheuheu

Be careful, GU can go very high…. I wait him at 1.6…. IMHO

$EURUSD next target 1.3740
Euro will reach 1,40..will see

GBPUSD Sudah TP di 57. Thank GS atas sugest buy nya 🙂

Bung GS sdh hampir sebulan saya menggunakan Robot GS di account demo main di Silver, dg mengikuti panduan yang ada hasilnya saya pikir cukup bagus. Nah begitu mau buka Live account (biar setiap hari bisa jalan di dua broker, satu manual satunya lagi menggunakan jasanya kang Obot) rasanya kok rada-rada rumit persyaratannya maupun proses Depositnya (selama ini saya pakai live account broker tetangga). Adakah panduan dlm bentuk PDF misalnya yg simple utk dibaca.

@Xmin,
sebenarnya tidak rumit Pak, kita membutuhkan verifikasi 2 jenis identitas yaitu KTP/SIM dan dokumen tagihan, karena untuk keamanan account juga.
discan dan dikirim kepada submit@gainscope.com

dan setelah accountnya disetujui dan menerima kiriman nomor login, maka boleh dilakukan deposit.

Nah, untuk transfer uangnya, maka cukup ke bank dan transfer seperti biasa dengan mengisi formulis RTGS.

Mudah kok Pak 🙂

kalau ada yang kurang jelas, bisa diemail ke kami

Terima kasih

Sore menjelang malam ini EU setelah terbang di jam 15:xx sore dan 17:xx sore dg spread dikisaran 160 point dampe malam ini ,EU menari nari dikisaran 25% dari high, EU turun ke 25%-30% dari Hi pointer , lalu naik lagi terus berulang ulang, cukup asik buat scalping bisa TP 10-20 point sekali OP…
Karena berulang ulang mengikuti trend naik dan turun penerapan DISIPLIN dg OP dengan kata kunci 25% cukup bisa Take profit hingga 150 pip dalam 3 jam. ( tentunya tetap pemakaian margin 0.5 – 1 % dari balances ..) jadi gak perlu deg deg an he he..
Just share ..still newbie..daeng

Sorry, the comment form is closed at this time.




Realtime Forex Chart